Using a Spool Adapter with Your Inline Process Refractometer

Spool Adapter
Two versions of inline refractometer adapters.
Inline refractometers use process adapters as the mechanical connection between the refractometer sensing head and the process piping. The adapter, also referred to as a "spool piece", is designed specifically to accommodate the pipe size and application.

On applications where pipe sizes are 2" or larger, the use of a refractometer sensing head spool adapter is suggested. This ancillary piece of hardware provides a mounting point for the sensing head between two flanges directly in the process piping.

The spool adapter positions the sensing head so that it measures from the center of the process flow. The spool adapter design includes an internal deflector and a 5 degree (angular) sensing head mounting connection. The deflector and angled mounting connection reduces sensor head coating issues from the process media. A steam purge tube connection is standardly included to accommodate steam/fluid cleaning.

Spool Adapter
Spool adapter with sensing
head mounted.
Spool adapters recommended mounting orientation is horizontal, generally placed in a horizontal segment of process piping. Vertical mounting is also acceptable, as long as the process flow is in an upward direction.

Spool Adapter
Spool adapter with hand
cleaning option.
Inline refractometer spool adapters are available with option to facilitate cleaning, service and process protection. Examples are lined adapters, hand cleaner adapters, high pressure cleaner adapters, isolation valves, sanitary connection adapters, and weld-in adapters.

BLRBAC Recommended Good Practice Document: Thermal Oxidation of Waste Streams in Black Liquor Recovery Boilers

The black liquor recovery boiler presents problems of operation and safety that far exceed those of the conventional power boiler or other forms of combustion equipment that can be used for the thermal oxidation of waste streams. The recovery boiler is primarily a chemical recovery process unit in which organic materials in the black liquor are burned while the oxidized sulfur compounds of sodium and potassium are reduced and drained as molten smelt from the furnace bottom. At the same time, the heat released is used for generation of steam for power and process.

This document is intended to address concerns of the industry relating to safe thermal oxidation of waste streams in recovery boilers. “Waste streams” for this document are produced in the pulping process. The major waste stream is noncondensible gases (NCG), which are gases that contain reduced sulfur compounds from the digester and evaporator operations and are a source of odor.

The following list is representative of the pulping process waste streams that are addressed:
  • Dilute Noncondensible Gas (DNCG)
  • Concentrated Noncondensible Gas (CNCG)
  • Stripper Off Gas (SOG)
  • Chip Bin Noncondensible Gas (CBNCG)
  • Dissolving Tank Vent Gas (DTVG)
  • Soap
  • Methanol
  • Turpentine
  • Tall Oil
  • Spent Acid
  • Secondary Sludge

Process Refractometers for Instant Coffee Production

Refractometers in instant coffee production
The morning alarm rings and you slowly rise for your daily routine.  You can’t wait to get the first taste of your day: Coffee!  One of the first things millions of people do worldwide to start their day is enjoy a nice hot cup of coffee.  Some people brew their own fresh coffee, some buy it ready made at their local convenience store or coffee shop, while others turn to their favorite brand of instant coffee (just add hot water, stir and it’s ready).

Approximately one third of all coffee consumed worldwide is instant coffee.  That number is lower in the United States, but other countries such as Great Britain and Japan love the stuff!  Instant coffee differs from the fresh ground bean version because it has already been brewed before at the factory.  The raw beans are cooked to perfection by the manufacturer.  They are then ground and brewed to very specific taste standards.  After the perfect brew is made, it is freeze dried and ground into tiny morsels just begging for some hot water to release their flavor again. 

The consistency and quality of the instant coffee that comes from each brewed batch is of vital
importance to the manufacturer.  If the end product is not consistent with the customers’ taste standards, then the brand will lose customers to other manufacturers who have a better, more consistent, brew.  It is during the brewing process where the inline refractometer plays a huge role in quality control.

process refractometer
Process refractometer sensor.

In the production of instant coffee, as large batches of coffee are brewed, process refractometers are used to monitor concentrations in evaporation procedures. The process refractometers are used to measure the amount of total dissolved solids (TDS), which refers to the amount of the soluble flavor material from the coffee bean that is extracted as a part of the brewing process. Coffee grounds are made up of about 70% non-soluble material and about 30% of soluble compounds. These soluble compounds are responsible for the coffee's taste. For a delicious instant coffee time and time again for the customer, the manufacturer must keep tight TDS tolerances on their batches of brew.  If the TDS measurement varies too much in each brewed batch, the end product will be inconsistent. This will lead to customer dissatisfaction, and ultimately loss of sales.

So the next time you enjoy a nice hot cup of instant coffee...thank the refractometer for helping maintain its’ deliciously consistent taste!

Electron Machine Corporation manufactures inline, process refractometers for large scale food and beverage production applications.

https://electronmachine.com
352-669-3101

The Important Role of the Inline Refractometer in Juice and Beverage Production

Inline Refractometer in Beverage Production
Every time a consumer purchases a beverage that they enjoy drinking again and again, it is because they love the taste of their favorite drink.  Why do they love it?  Because they have grown to trust that the taste they expect is always the same!  They continue to purchase their favorite drink because it is dependable, reliable, and delicious for them every time!

The consumer gets this feeling because of the consistency of product. The consistency is a function of production processes on the part of the manufacturer. Many drinks and beverages have a certain amount of sugar added for optimal taste.  If the process used to mix the sweetener into the drink deviates, even in the slightest, then product consistency will suffer and so will consumer satisfaction.

Enter the process refractometer.  With its precisely calibrated refractive index set to the exact parameters specified by the manufacturer, the quality and consistency of each and every product batch will fall within the acceptable quality control range.  Any deviation from the "sweetness" settings (degrees Brix) are immediately detected by the inline refractometer, and can be quickly corrected by automated signals sent to a final control element and eliminate the deviation. This ensures a quality product for consumers time in and time out, as well as keeping costly losses due to defective batches at a minimum.

Another area in beverage production where inline refractometers are used is in the container and piping sanitization processes. Each producer must keep their process components cleaned and sanitized to industry and government standards. The beverage manufacturer needs to ensure container cleanliness prior to filling, and also guarantee proper flushing of the process piping during product changeover. The cleaning process is regularly done with some aggressive chemicals, namely hydrogen peroxide and sodium hydroxide.  Inline refractometers are used to ensure the precise concentration of theses two cleaning agents. By using the specific refractive index of each chemical, a process refractometer can control the optimal amount for the cleansing processes, again ensuring quality and consistency on the part of the manufacturer, while offering peace of mind that the process components are cleaned and sanitized to exact industry and government standards.

Process refractometers proved an extremely important role in the production of juices and beverages in both the product consistency, and also the safety and cleanliness of the production process.

For more information, contact Electron Machine Corporation by calling 352-669-3101 or visit their web site at https://electronmachine.com.

Inline Process Refractometers for Food & Beverage


Inline process refractometers are used in many food and beverage applications. Some examples are beer, wine, gelatin & gummy candies, soy milk & tofu, tomato purée, ketchup, brine, canned coffee, jams, jellies, and honey.

The  process refractometer is used to assist in controlling sweetness and dissolved solids. The sensor is mounted in the sanitary process piping, while the control electronics are remotely mounted and provide outputs and communications to larger supervisory control systems.

For more information about inline process refractometers used in food and beverage applications, contact Electron Machine Corporation by calling 352-669-3101 or visiting https://electronmachine.com.

°Brix Measurement with Inline Refractometers

Refractometers measure Brix in juice
Refractometers are used to measure Brix in various juices.
A wide variety of food and beverage products rely on sweetness as a standard of consistency and quality. The unit of measurement to determine the concentration of sugar in food and beverage is °Brix (degrees Brix). Commercial processors of juices, wine, beer, soft drinks, tomato products, dairy, maple syrup, honey, jams and jellies implement the use of some form of refractometry to determine °Brix in their products.

°Brix (symbol °Bx) is the percentage of sugar dissolved in the subject product. One degree Brix equals 1 gram of sucrose in 100 grams of solution. °Bx is a degree scale from 1-100. A solution that is 15°Bx is 15 percent sucrose by weight. Measuring °Bx is based on the index of refraction or the density of the process media at specific reference temperatures of 20°C.

inline industrial refractometers
Inline industrial refractometer with control electronics.
One type of instrument used to measure °Bx is called a refractometer. Smaller food and beverage producers use hand-held refractometers to determine °Brix in product batches. Large scale producers, with continuous processing or high volume batches, use highly accurate, rugged, inline industrial refractometers which are installed on the process piping and become part of their overall control scheme.

All refractometers use the refractive index (RI) of the food/beverage concentration as the measurement method to determine °Bx.  The refractive index (or index of refraction) of a material is a dimensionless number that describes how fast light propagates through the material, or in other words, how much the path of light is bent, or refracted, when entering a material.

Refractometers often require some type of correction or linearization based upon the substance they are measuring. To account for other undissolved solids, organic acids or ethanol in the process media, specialized curves must be used. Inline process refractometers include these custom curves in the microprocessor programming, and can be selected through the refractometers user interface for varying product runs.

For more information about the measurement and control of °Brix using inline refractometers, contact Electron Machine Corporation.

352-669-3101