Process Refractometers for Instant Coffee Production

Refractometers in instant coffee production
The morning alarm rings and you slowly rise for your daily routine.  You can’t wait to get the first taste of your day: Coffee!  One of the first things millions of people do worldwide to start their day is enjoy a nice hot cup of coffee.  Some people brew their own fresh coffee, some buy it ready made at their local convenience store or coffee shop, while others turn to their favorite brand of instant coffee (just add hot water, stir and it’s ready).

Approximately one third of all coffee consumed worldwide is instant coffee.  That number is lower in the United States, but other countries such as Great Britain and Japan love the stuff!  Instant coffee differs from the fresh ground bean version because it has already been brewed before at the factory.  The raw beans are cooked to perfection by the manufacturer.  They are then ground and brewed to very specific taste standards.  After the perfect brew is made, it is freeze dried and ground into tiny morsels just begging for some hot water to release their flavor again. 

The consistency and quality of the instant coffee that comes from each brewed batch is of vital
importance to the manufacturer.  If the end product is not consistent with the customers’ taste standards, then the brand will lose customers to other manufacturers who have a better, more consistent, brew.  It is during the brewing process where the inline refractometer plays a huge role in quality control.

process refractometer
Process refractometer sensor.

In the production of instant coffee, as large batches of coffee are brewed, process refractometers are used to monitor concentrations in evaporation procedures. The process refractometers are used to measure the amount of total dissolved solids (TDS), which refers to the amount of the soluble flavor material from the coffee bean that is extracted as a part of the brewing process. Coffee grounds are made up of about 70% non-soluble material and about 30% of soluble compounds. These soluble compounds are responsible for the coffee's taste. For a delicious instant coffee time and time again for the customer, the manufacturer must keep tight TDS tolerances on their batches of brew.  If the TDS measurement varies too much in each brewed batch, the end product will be inconsistent. This will lead to customer dissatisfaction, and ultimately loss of sales.

So the next time you enjoy a nice hot cup of instant coffee...thank the refractometer for helping maintain its’ deliciously consistent taste!

Electron Machine Corporation manufactures inline, process refractometers for large scale food and beverage production applications.

https://electronmachine.com
352-669-3101

The Important Role of the Inline Refractometer in Juice and Beverage Production

Inline Refractometer in Beverage Production
Every time a consumer purchases a beverage that they enjoy drinking again and again, it is because they love the taste of their favorite drink.  Why do they love it?  Because they have grown to trust that the taste they expect is always the same!  They continue to purchase their favorite drink because it is dependable, reliable, and delicious for them every time!

The consumer gets this feeling because of the consistency of product. The consistency is a function of production processes on the part of the manufacturer. Many drinks and beverages have a certain amount of sugar added for optimal taste.  If the process used to mix the sweetener into the drink deviates, even in the slightest, then product consistency will suffer and so will consumer satisfaction.

Enter the process refractometer.  With its precisely calibrated refractive index set to the exact parameters specified by the manufacturer, the quality and consistency of each and every product batch will fall within the acceptable quality control range.  Any deviation from the "sweetness" settings (degrees Brix) are immediately detected by the inline refractometer, and can be quickly corrected by automated signals sent to a final control element and eliminate the deviation. This ensures a quality product for consumers time in and time out, as well as keeping costly losses due to defective batches at a minimum.

Another area in beverage production where inline refractometers are used is in the container and piping sanitization processes. Each producer must keep their process components cleaned and sanitized to industry and government standards. The beverage manufacturer needs to ensure container cleanliness prior to filling, and also guarantee proper flushing of the process piping during product changeover. The cleaning process is regularly done with some aggressive chemicals, namely hydrogen peroxide and sodium hydroxide.  Inline refractometers are used to ensure the precise concentration of theses two cleaning agents. By using the specific refractive index of each chemical, a process refractometer can control the optimal amount for the cleansing processes, again ensuring quality and consistency on the part of the manufacturer, while offering peace of mind that the process components are cleaned and sanitized to exact industry and government standards.

Process refractometers proved an extremely important role in the production of juices and beverages in both the product consistency, and also the safety and cleanliness of the production process.

For more information, contact Electron Machine Corporation by calling 352-669-3101 or visit their web site at https://electronmachine.com.